Fediw tilt fence jig
Michael Fediw of London, Ontario has come up with a very useful jig that he uses on his bandsaw. His jig can also be adapted for other machines.
Lou Peeters
Articles by Lou Peeters
Thorne clamp jig
Bill Thorne, an avid woodworker and mechanic from London, Ontario designed this clamping jig.
Countertop connector jig
It is not an attractive joint but it can be very useful when parts have to be assembled on site.
Spline jig
One of the most difficult joints to assemble is the cross grain mitre joint. This joint always tends to slip out of alignment when the glue is applied.
Biscuit joiner jig
This jig that is useful for making the cuts associated with a biscuit joiner.
