Canadian Woodworking
Product Showcase

Product Showcase 2024 - King Canada

Product Showcase 2024 – King Canada

There are lots of choices to be made when setting up a first workshop or upgrading an existing shop. Whether you’re a beginner or seasoned woodworker, these hand and power tools, machines, and workshop accessories will help you tool your shop so that you can build your dreams.

Get a superior finish on all your lumber

King Canada planer

A benchtop thickness planer is a cost effective way to machine lumber to final thickness. The King Industrial 13″ planer (#KC-13HPC) features a heli­cal cutterhead (equipped with 26 cutter inserts) that is quieter, requires less energy to operate, reduces or eliminates sanding work and leaves a smoother finish, with no tear-out, especially when it comes to figured woods. It features a 15 Amp motor with thermal overload protection, four precision ground columns for extra stability, pre-set depth stops for repeat cuts and a 2-position dust chute with 4″ and 2-1/2″ adapter outlets.

Power when and where you need it

King Canada 12,000 watt gasoline generator

The King Canada 12,000 watt gasoline generator (#KCG-12000GE) is ideal for job sites or as backup power for your home during emergencies. It features a powerful 18 HP, 4-stroke air cooled OHV engine, an automatic voltage regulator (AVR) system that regulates voltage varia­tions to deliver a constant reliable power supply, a low oil shut-off with indicator light to protect the engine, electronic ignition for enhancing fuel efficiency and reducing maintenance issues, and an electric start but­ton as well as a pull cord. Includes two 120V/20A outlets, and both 30A and 50A 120V/240V out­lets. Comes with a 12V battery and spark plug socket. Also available in a dual fuel model (#KCG-12001GE-DF).

A versatile and flexible tool for a multitude of sanding tasks

King Industrial 6"× 48" belt and 9" disc sander

The King Industrial 6″× 48″ belt and 9″ disc sander (#KC-760L) can handle a wide range of sanding and surfacing jobs. The powerful 1 HP, 10-amp direct drive motor delivers a disc speed of 1,740 RPM and a belt speed of 1,250 SFPM, while a heavy-duty cast-iron body and steel base add stability and minimize vibration. The belt platen is covered by a graph­ite pad that reduces friction and increases belt life. A quick belt release lever makes for easy belt replacement. The solid cast-iron belt and disc tables have integrated T-slots and tilt from 0° to 45°. The adjustable belt unit operates vertically, horizontally or at any angle in between. Connect to a shop vac or dust collector via the dual 2-1/2″ to 4″ dust hook-up adapters.

The best tool for cutting laminate flooring

King Canada 13’’ professional lami­nate flooring cutter

The King Canada 13’’ professional lami­nate flooring cutter (#KC-13LCT) delivers clean, burr-free cuts in a variety of materials, includ­ing laminate flooring, vinyl tile, engineered wood and vinyl siding. It cuts mate­rial up to 13″ wide and 19/32″ thick. Using the mitre gauge you can make angled cuts from 0° to 45°. And, because this cutter is operated manually, it doesn’t produce noise or dust.

Open up a whole new world of wood surface finishing

King Industrial 22" open drum sander

Anyone who does a lot of sanding, especially with shop-sawn veneer, large panels, or figured lum­ber, will find the King Industrial 22″ open drum sander (#KC-2244DS) indispensable for obtain­ing consistently flat, smooth surfaces in short order. With its open ended design this machine can sand a 44″ wide piece in 2 passes. The powerful 1.75 HP drum motor spins at 1,720 RPM, while the 1/8 HP belt feed motor enables you to control the feed rate from 0 to 31 inches per minute. The maximum sanding capacity is 1/64″ per pass, and you can sand stock up to 5″ thick. Comes with a metal stand and 4 caster wheels for easy mobility.

The ideal bandsaw for small workshops

King Canada 12" bandsaw

Equipped with a powerful 3/4 HP motor, the compact King Canada 12″ bandsaw (#KC-1202FX) delivers a 12″ cutting capacity between the frame and blade and a 6-3/4″ resaw capacity. It has a generous 18-7/8″ by 15-3/8″ tilting table with rack & pinion adjustment. The upper and lower ball bearing blade guide sys­tem also uses rack & pinion adjustment. The dust chute accepts 2″, 3″ and 4″ dust collector hoses. It comes with a cast aluminum miter gauge, rip fence with 5″ high face, push stick, adjustment wrench and hex keys.

Leave a Reply

Your email address will not be published. Required fields are marked *

More news
Government support acknowlege
Partnership ontario
Username: Password: