SPONSORED
The new Mirka Ultimax Ligno abrasive is tailored for hard and soft wood sanding applications. It combines a fast cut with long life, thanks to especially good resistance to clogging when sanding substrates. The grit is bonded to the backing with VOC-free resin for superior adhesion, ensuring a safer and healthier choice for both users and the environment. A special latex-impregnated paper prevents edgewear and tearing when sanding edges of wood surfaces. The recognizable hourglass grain pattern of the Mirka Ultimax Ligno ensures optimal cutting performance with consistent results. The segmented surface increases sanding pressure on each abrasive grain and directs dust through the channels in between the abrasive particles. This creates less resistance to clogging and prevents swirl marks on the working surface. In addition, each segment has four sharp corners and two angled surfaces, constantly creating additional cutting edges during sanding. This gives the Ultimax Ligno a consistent fast cut and great sanding results, a longer life for each abrasive, and reduced waste. Available in both PSA and H&L 5″ and 6″ discs, 3″ × 4″ and 3″ × 5″ H&L sheets, 4-1/2″ × 164ft roll and 4-1/2″ × 5″ perforated rolls of 130 pieces. 11 grit sizes from 40 to 400 grit.
