Canadian Woodworking

Festool OF 1010 REQ-F-Plus router

A mid-sized, lightweight, full-featured router for precision routing.

post-thumbnail

A mid-sized, lightweight, full-featured router for precision routing.

Author: Carl Duguay
Photos: Lead photos by Festool, other photos by Carl Duguay

Drill/driver, sander and router are the triumvirate of power tools. With these three tools, and a few hand tools, you can build just about anything. Of these three the router is the most versatile. It excels at joinery, edge treatment, profiling, grooving, inlaying and much more.

Festool’s new OF 1010 R (#576922) router is an updated version of the reputable OF 1010 router, which has been on the market for over a decade. I’ve had the pleasure of shop-testing the new OF 1010 over the past two months, and it’s quickly become my go-to router. Here are what I think are the most outstanding features of the OF 1010 R.

Festool OF 1010 REQ-F-Plus
MSRP: $775 (includes router, chip catcher, 1/4″ and 8mm clamping collets,
wrench and Systainer)
Website: festoolcanada.ca

Festool OF1010
The OF 1010 R comes with 1/4″ and 5/16″ (8mm) collets. At just under six pounds, it’s heavier than a palm router. However, the inline height adjustment handle and long main handle along with a low centre of gravity provide a comfortable, well-balanced feeling in use.

You get a routing stroke of 2-1/8″. Bit installation is super quick. The spindle stop is large enough to firmly press down on and the widely spaced plunge rods give ample room to manoeuvre the wrench (and an excellent view of the routing area and bit). One of the most superb features on this router is the micro-depth adjust­ment. A simple turn of the fine-adjuster knob enables you to move the router bit up or down in 1/128″ increments over a range of 5/16″. It’s a feature I use almost every time I pick up this router.

Festool OF1010
Fine-Tune Adjustments – Micro-adjustable depth control is accurate to an impressive 1/256″

I’d be surprised if you could get better dust management on any router. When connected to a dust extractor, I would estimate that 80 to 90 percent of the chips and fine dust are removed. When routing edges you’ll want to spend the 60 seconds or so it takes to install the chip collector. It does a great job of diverting chips from the router bit to the dust extractor connector. If you do template work, then you’ll be happy to know that the OF 1010 R has a stan­dard guide bushing adapter that accepts the popular 1-3/8″ guide bushings.

Festool OF1010
Good Add-Ons – The chip catcher (left) reduces mess and airborne dust, while the guide bushing adapter (right) adds greater versatility by allowing you to use a standard guide bushing with this router.

The included guide rail adapter and guide rails enable you to use the router with a Festool guide rail for making perfectly straight grooves, dadoes and rabbets. You also get a convenient height adjustable support that attaches to the side of the router to pre­vent it from tipping over when used with a guide rail. There’s also a range of optional accessories that expand the capability of the OF 1010 R.

Festool OF1010
Use Your Track – When equipped with the available guide rail adapter and guide rails, the OF 1010 REQ-F-Plus will rout grooves and dadoes with ease.

The design, features and precision of the OF 1010 R make this one outstanding router.

Festool OF1010
Feels Great – In use, the 1010 is well balanced and easy to control.

By the way, if you’re confused with Festool’s nomenclature, here’s what OF 1010 REQ-F-Plus means:
OF – router (from the German OberFräse)
R – relaunch of a previous model
E – electronic (variable speed, soft start,
thermal overload protection)
Q – plug-it power cord
F – fractional inch on the depth scale
Plus – comes with a Systainer

Published:
Last modified: July 17, 2023

Carl Duguay - [email protected]

Carl is a Victoria-based furniture maker and the web editor at Canadian Woodworking & Home Improvement.


4 Comments

  1. I use mine for the ecosystem that supports it. I use my others-Bosch, Makita, Milwaukee, and Ridgid as workhorses, or quick trim routing. The OF1010- really does have the best collection, it’s super simple to use and dial in also. I’d say it shines when hogging out material with precision, and throwing it on my track for nice dados, and recently did some nice geometric decor panels for a customer. This sounds like a sell now. You won’t regret it if you will use it regularly or often, it would pay for itself. If you want a router that is effective, light, and affordable I would check out the m18 Milwaukee trim router. She’s a beast.

Leave a Reply

Your email address will not be published. Required fields are marked *

Check out other tool articles
Government support acknowlege
Partnership ontario
Username: Password:
Clicky