Canadian Woodworking
Company News

New WORX combo kit bundles 20V Leafjet Blower and Gutterpro attachment

New WORX combo kit bundles 20V Leafjet Blower and Gutterpro attachment

Charlotte, NC – Just in time to prepare for fall leaf disposal, WORX® has bundled its 20V Leafjet Blower and Gutterpro Attachment. Unlike other blowers, Leafjet enables homeowners to instantly switch between high air speed and volume for various applications. Plus, the Gutterpro attachment helps remove leaves and other debris from gutters while the user stands safely on solid ground.

The WORX 20V Leafjet Blower combines the benefits of speed and air volume, while driving both with an inline brushless motor. The maintenance-free, brushless motor runs cooler with less friction and heat buildup than conventional motors with brushes, resulting in smooth, reliable operation and 10 times longer motor life.

By simply sliding the Leafjet Blower’s variable air control nozzle forward or backwards, the user can select which mode works best for a particular application. High-speed mode (rear position) is great for dislodging leaves and debris from grass or shrubs, while high-volume mode (forward position) works best on hard surfaces and clearing large, open areas. Plus, the blower utilizes dual air-intakes for pumping out greater air volume when in the forward position.

The blower also has two speed options for added control in both tight spaces and large areas. At low speed, it operates at 95 mph with 190 cubic-feet-per-minute (cfm). At high speed, it’s velocity increases to 130 mph with 410 cfm. The speed control dial is integrated into the blower’s, D-shaped handle for easy access.

The dual-function, two-speed blower is powered by a WORX 20V 4.0Ah Power Share battery, which is compatible with more than 75 WORX 20V, 40V and 80V lawn and garden, DIY and lifestyle products for convenience and cost efficiency. A charge level indicator on the battery provides a quick reference for remaining runtime.

The 20V Leafjet Blower weighs only 3.8 lbs. (with battery) and is well balanced, due to its compact design and powerful, lightweight, inline motor. Its handle has a tactile, rubber grip for maximum comfort and control, even during extended use periods.

The Gutterpro attachment adds another dimension to Leafjet’s versatility by providing an easier, safer way to clear dry leaves, twigs, pine needles, acorns and other debris from first-floor gutters while standing on the ground. No ladder required.

Gutterpro comes with an adapter to connect it right to the main tube of the Leafjet. Just remove the variable-speed control nozzle, install the adapter and Gutterpro, and off you go.

As the lightweight, plastic tubes create a solid connection with Leafjet’s main tube, it is easy to lift and maneuver, even for extended periods. It reaches up to 11 ft. over the top of the gutter, allowing the hooked extension to direct a strong, focused stream of air to blow away leaves and debris.

The Leafjet Blower with Gutterpro Attachment includes a 20V 4.0Ah battery, 2A charger and wide nozzle attachment. It is covered by the WORX three- year limited warranty.

The WORX 20V Leafjet Blower with Gutterpro Attachment (WG543.1, $179.99) is available at worx.com.


Leave a Reply

Your email address will not be published.

More news
Clicky