Canadian Woodworking
Company News

New DEWALT 20V MAX XR 30º paper collated framing nailer 

New DEWALT 20V MAX XR 30º paper collated framing nailer 

Complete up to 100 ft. of wall framing per charge† with DEWALT’s next-generation framing nailer

MISSISSAUGA, ONTARIO – Apr 23, 2024 – DEWALT, a Stanley Black & Decker (NYSE: SWK) brand and leader in total jobsite solutions, today announced the new 30º Paper Collated Framing Nailer (DCN930) delivering powerful performance in a wide range of applications. Designed with an innovative flywheel, the nailer help minimize downtime between shots by allowing the tool to stay active after the trigger is released.

“Productivity is vital on the jobsite and this new DEWALT nailer will keep pros working at optimal efficiency with the new flywheel that eliminates ramp-up time between shots in rapid sequential mode,” said Tyler Knight, Senior Product Manager Stanley Black & Decker. “The nailer is lightweight at just 8.65 lbs. (tool only) and provide the convenience and mobility of cordless without the hassles of compressor and hose hook-up that extend setup and breakdown time.”

The nailer allow pros to install up to 530 sq ft. of subflooring** and complete up to 100 ft. of wall framing per charge† for enhanced productivity. This new model also drives nails up to 72% more sub-flush than previous nailer model††.

The next-gen nailer is compatible with newly introduced optional extended magazine model #DZN930 (sold separately), which is constructed from high-strength magnesium and hold two strips of nails. Users can align and drive up to 3-1/2 in. nails at aggressive angles with the redesigned nose that is engineered for “toe-nailing” applications. With field serviceable springs and a driver blade, the nailer also require less delay-inducing maintenance.

The DEWALT 20V MAX* XR® 30º Paper Collated Framing Nailer as well as extended magazine will be available in late May where DEWALT products are sold. The model comes as a bare tool (DCN930B @ $599), a kitted version (DCN930P1 @ $799) and the extended magazine sells for $129 seperately.

To learn more about the DEWALT products, please visit:

*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

**32 nails per 3/4 in. OSB subfloor 4 ft. x 8 ft. panel, using DCB205 5Ah battery (sold separately).

†7 nails per SPF wall stud, using DCB205 5Ah battery (sold separately).

†† vs. DCN21PL and DCN692, 3.25 in. smooth shank nail into laminated veneer lumber, using DCB205 5Ah battery (sold separately).

Leave a Reply

Your email address will not be published. Required fields are marked *

More news
Government support acknowlege
Partnership ontario
Username: Password: