The Manpa line of multi-extension carvers are the ideal accessory for carving, sculpting and texturing wood. They can be installed on almost any brand of 4-1/2″ angle grinder and are available with either a 2″ or 3″ cutter head in either a Basic or Master configuration. The Basic models contain an 8″ extension bar, while the Master models contain 8″, 10-1/2″ and 14″ bars. Extension bars determine the distance the cutter head is from the head of the grinder. You may also order a Manpa extension carver preconfigured with a FEIN angle grinder.
Manpa multi extension carvers deliver smooth, clean, effortless omni-directional cutting in any wood species.
Manpa 3″ Multi Carver (model MP21-3-M)
Manpa 2″ Round Cutter (model MP21-2-8)
The business end of the Manpa 2” multi-extension carver is fitted with a 2” round cutter while the 3” model comes mounted with a 3” round cutter, each one equipped with 3 round, replaceable, tungsten carbide cutting heads. They cut smoothly in any direction, forward, backward, and laterally from side to side. Also available is a variety of 6mm, 8mm and 12mm round cutting heads as well as a unique choice of triangle and square cutters.
Manpa 3″ Triangle Cutter (model MP21-6)
This is a powerful, quality cutter that leaves a distinctive V groove in its wake and totally opens up new horizons in texturing and design. Also available in 2” and 4” diameters.
Manpa 2″ Belt Cutter with a FEIN grinder (model MP21-2-BF)
Both Manpa 2″ and 3″ Manpa multi extension carvers are available preconfigured with a FEIN 4-1/2″ angle grinder (#WSG7-115) that features a thumb controlled on/off slide switch. The FEIN grinder packs the power and versatility of a larger angle grinder in a lighter, compact, more ergonomic design. Its smaller grip size allows for better control and ease of operation.
For more information visit KATools.com
